Rep: 1
1
What is holding down the front glass on a iMac A1225-2211 iMac 8.1 24"
Iunderstand you just remoce the glas by lifting it up. looking to find out what holds the glass in place and where the contact points are?
Ron.neufeglise@ctv.ca
Esta é uma boa pergunta?
Rep: 2,4 mil
15
9
9
I just used a couple of suction cups that were holding our soap dish to the shower wall. There is a guide at iMac Intel 24" EMC 2267 Glass Panel Replacement.
Esta resposta foi útil?
Rep: 35,1 mil
140
71
53
The glass is held by 14 magnets, thats why you only need 2 suction caps to remove it
Esta resposta foi útil?
Rep: 13
1
Actually, you only need 1 suction cup ....
http://www.harborfreight.com/4-1-2-half-...
This is all I use, and for only $2.99 even! Best priced tool I have ever bought, use it for more than just iMac glass.
Esta resposta foi útil?
Rep: 13
2
Even easier, I used a small piece of clear packing tape. Worked fine and left no residue. The amount of force needed is very small, just be careful not to break the pins by rotating the glass as you pull it off.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 3
Duração total: 3,998
1 comentário
Thanks for the info . It removed very easily
por Ron Neufeglise