Ir para o conteúdo principal

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Perguntas Visualizar todos
Pergunta encerrada

Identify part that fell out when repairing

After following the step by step instructions on replacing broken glass a small silver piece and circular part fell out. It has the letters h-f on it. Can you tell me what this is and where they belong?

It fell out right after step 6. when I disconnected ribbons 1,2,3. and removed the glass from the mother board.

Block Image

A larger view of the part.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
1 comentário

Post an image of your part with your question. It will make it a lot easier to identify.

por

Adicionar um comentário

2 respostas

Pergunta mais útil

Hello! It is the "MIC" of iPhone 3G. Show u as below pictures.

It belongs to complete dock assembly replacement. So I think you need to replace this spare part.

Here is the replacement part , http://bit.ly/1bLJiwc . You can know more at this website.

Hope will help you.

Block Image

Block Image

Block Image

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

can you make the picture bigger?

Esta resposta foi útil?

Pontuação 0

2 comentários:

also you didnt mention at whatpoint it fell out

por

I cant find a place for it either, could it have come from somewhere on the broken glass screen? I would try finishing the repair as normal and seeing if it works then troubleshoot it from there. If it turns on, check all the settings and buttons and make sure they are working.

por

Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 90