Ir para o conteúdo principal

iPhone de quarta geração lançado em 2010. O reparo é simples, mas o vidro frontal e o LCD devem ser substituídos juntos, como uma unidade. GSM / 8, 16 ou 32 GB de capacidade / Modelo A1332 / Preto e Branco.

2375 Perguntas Visualizar todos

part inside iPhone 4

Block Image

While replacing my iphone 4 screen I noticed a small black piece with a groove in it and i dont know where it goes back. It is about one centimeter long and the heighth of a few sheets of paper and it has a groove in it. It appears to fasten on somewhere for possible protection or a spacer and it is rubber. can someone help? Thanks

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
3 comentários

Can you take a photo of it and post it here, we should be able to identify it for you then.

por

i cant seem to get a picture uploaded. How do I do that?

por

I uploaded a image but i dont see it on here

por

Adicionar um comentário

1 resposta

Solução escolhida

That is the front screen flex cables bumper cushion. It is not a necessary part, but is designed to protect the cables. It sits at top edge of logic board (with groove holding logic board) under the screen flex cables.

Esta resposta foi útil?

Pontuação 1

1 comentário:

ok.. thanks alot

por

Adicionar um comentário

Adicionar a sua resposta

doug será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 95