Pular para o conteúdo principal

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

216 Perguntas Ver todas

Why wiill it not boot after new digitizer fitted?

I have just replaced a digitizer front screen on a friends iPad 4.

It was working fine before I did this, the screen was just cracked.

Now I get [NAND] find flash media and keepout 601 physical block off set .... there are about 5 to 6 lines all starting with NAND, The Apple logo is in the centre of the screen.

The only way I can turn the machine off is holding down the home button and sleep bottom together.

Help! Many thanks Dan

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0

Comentários:

check my answer below

por

Adicionar um comentário

3 Soluções

Resposta Mais Útil

we have the same problems please help!

Esta resposta foi útil?

Pontuação 1

Comentários:

looook below!!!!!!

por

Adicionar um comentário

you want an answer ,??? no prob!! check the 3rd connector of camera disconnect it ,remove battery ,reassemble it again W/O THE CAMERA CONNECTOR IN !! and try

if still issue remains ---try a new lcd full set! and if its still with the nand error of kernel panic !!!

check the------------->>>> u2 chip!!!!!!!!!! and cover the whole board with tape so that there wont be any connection to the back lcd bezzel aluminium cover!!

http://i00.i.aliimg.com/img/pb/465/292/6...

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Has anyone tried this fix from Masta at all and can you advise more on method and outcome please?

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Dan será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 363