Ir para o conteúdo principal

iPhone de quarta geração lançado em 2010. O reparo é simples, mas o vidro frontal e o LCD devem ser substituídos juntos, como uma unidade. GSM / 8, 16 ou 32 GB de capacidade / Modelo A1332 / Preto e Branco.

2375 Perguntas Visualizar todos

iPhone 4 won't boot after screen fix

Hi

I've replaced the screen on a friends iPhone 4 and it wont boot, everything is plugged in properly all screws are in their proper places, I just took it apart AGAIN, and there is a small metal bracket loose in there.. Does anybody know where this should go (its from under the metal casing over the screen, headphone/sleep wake ribbon connectors).. Link below to photo..

Cheers,

Chris

the bit at the bottom of the pic

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

That metal piece is a ground for your signal it must be reinstalled on top of emi shield before reassembly.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Chris Williams será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 85