Conserte seus objetos Comunidade Loja

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 Perguntas Visualizar todos
Pergunta encerrada

Opções

CAN'T Replace Hard Drive DOES NOT READ it! HELP!

Bought by IFIXIT suggestion

1TB 5400 RPM Toshiba SATA Hard Drive (new)

I read it was compatible with my macbook so I went

for it - when I try to change it - twice it didn't read it

at all.

My brother had a similar problem with its macbook pro

when it came to hard drive of 1TB.

Now I wonder is there any chance I can still use this hard drive internal or should I give up get a case and use it as external!?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Solução escolhida

Opções

Your have given very generic information about your machine and HD. Your machine has (can only use) Serial ATA (1.5 Gb/s). If the new drive is SATA II/III (3 to 6GB/s) it wont work. SOME drives can be manually set to SATA I - some can not.

Some external cases can automagically match USB speed - so that may work.

If this Answer is helpful please remember to return and mark it Accepted.

Esta resposta foi útil?

Sim Não
Pontuação 0

2 comentários:

Hi @machead3,tnx for your answer.

So here my HD Serial ATA from 160GB or 250GB to 5400 giri/min

(its italian I don't how to translate it to you in english).

About my New HD I think its a SATA2 (TOSHIBA MQ01ABD100)

how do I understand if I can manually set it to SATA1? and if I

can how do I do it?

por

Generally SATA II can drop back one version without problems - the manufacturers site should have information/instructions about this. Contact their support department.

por

Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 92