Damaged LVDS Socket, lost pins. Maybe Panel @ DisplayPort?

The connectors referenced by Christoph could fit your needs - but be aware that it is pretty easy to burn the solder coating with a normal solder station. Use a 5 watts type like you would be using for SMD type boards and soldering.

Of course you could solder the wires of the LVDS cable directly to the board, but that would not be easy to do.

Regards, Stone

Esta resposta foi útil?

Sim Não

Pontuação 1

1 comentário:

Hi Christoph

That would be the right guy to do the repair ;-)

I am not sure about the thing shown in your second picture. It looks like a connector, too. What seems to be broken is the isolation - so it comes to the plug if this will dangerous or not (if the plug is fully covered it should not be a problem).

But I have to say, I am not that familiar with iMacs (cause I do not have one nor had) - can you please tell me what is normally connected to it or do a picture of the whole board just marking the connector?

Thanks, Stone

22 de ago de 2013 por Stone

Adicionar um comentário

maybe this will work?:

http://www.ebay.com/itm/NEW-I-PEX-LCD-LE... — Christoph
Hi Christoph

That would be the right guy to do the repair ;-)

I am not sure about the thing shown in your second picture. It looks like a connector, too. What seems to be broken is the isolation - so it comes to the plug if this will dangerous or not (if the plug is fully covered it should not be a problem).

But I have to say, I am not that familiar with iMacs (cause I do not have one nor had) - can you please tell me what is normally connected to it or do a picture of the whole board just marking the connector?

Thanks, Stone — Stone

iMac Intel 27" EMC 2390

Damaged LVDS Socket, lost pins. Maybe Panel @ DisplayPort?

Update

1 resposta

Adicionar a sua resposta