Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3252 Perguntas Ver todas

Black screen after replacing powerbutton

After repairing the iPhone all I get is a black screen. The phone is still working, the blacklight lits on but no image.

All I did was replacing the powerbutton and the powerbutton flex cable. I didnt touch the display at all.

I tried everything from reset to cleaning the contacts.

Nothing worked.

Do you think the LCD or cable/connector is broken?

If so, what could be the cause since i didn't touch display?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

4 Soluções

Solução escolhida

you have to take the display of the frame when replacing the power button. otherwise you have to bend the flex cables to much to take the screws out. as a result the cables break...

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Was going to say make sure the connector is seeded correctly

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

exact same thing here, have you found a solution?

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Iwillfix is correct bending the cables back that far has messed the LCD up

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Yannick será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 168