Ir para o conteúdo principal

Versão renovada do iPhone 3G com velocidades de processamento mais rápidas. O reparo deste dispositivo é semelhante ao do 3G e requer simples chaves de fenda e ferramentas de abertura. Modelo A1303 / 8 GB,16 GB ou 32 GB de capacidade / Parte traseira em plástico preto ou branco.

1500 Perguntas Visualizar todos

Don't Know where this part (metal cover) belongs?

Hello,

Ich changed the battery of my device yesterday, after opening the device and removing the logic board this metal cover fell right out of the phone.

[IMG]http://imageshack.us/a/img542/1772/78er....[/IMG]

Block Image

[IMG]http://imageshack.us/a/img837/6051/yoap....[/IMG]

Block Image

I think it must have been loose before, because i was able to hear something rattling, when I shakes the phone.

After the battery change, I know have the issue, that I don´t get any WiFi reception.

I do not know where this cover belongs, so I am asking you for help.

thanks from Germany

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
1 comentário

Ok, thanks

Do you know if it is important for WIFI reception?

por

Adicionar um comentário

2 respostas

Pergunta mais útil

its a cover from the back side of the main board

Block Image

you can see it on the top

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

From looking at this picture. it seems to be a cover. Maybe where i circled will be the location it goes. Seems to match the irregular cut.

Block Image

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Maximilian será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 119