Allan Jones responded to my inquiry on Apple support community post on 5/4/13.
I am located near Madison, WI. He suggested finding someone who could solder the connector to the board. Any suggestions?
Esta é uma boa pergunta?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
First read through this guide: Soldering Skills
Next order this:
and this:
[produto vinculado ausente ou desativado: IF145-018]
Never pay for soldering again.
Esta resposta foi útil?
Also get: fine point replacement tips, desoldering braid and some practice boards (you'll want a lot) it's easy to burn up the board & traces. (See why I said it might be smarter to pay someone to do this?)
Rep: 116,3 mil
66
68
359
Use the yellow pages or google for electronics repair shop. Soldering component boards (and disassembly of that sonic sealed uint) is not an easy DIY project.
Good Luck
If this Answer is helpful please remember to return and mark it Accepted.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 468
