Ir para o conteúdo principal

Tudo que você precisa para reparar por conta própria o seu iPhone! A iFixit tem guias de reparo gratuitos e informações de desmontagem para cada um dos modelos iPhone, assim como as melhores peças de reposição e ferramentas da galáxia!

36389 Perguntas Visualizar todos
Pergunta encerrada

Mic wont work after receiving water damage, Dock faile

The iPhone gets above water, is do work well everywhere but the microphone does not.

Changed the Mic and 'still does not work.

I wonder if it may be damaged the motherboard or is there any solution

:)

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

Yes when you put a powered logic board in water it will get damaged. Especially if you put power to it before it's had adequate time (days not minutes or hours) to dry.

You can use the tags at the left to find a guide and advice about troubleshooting your problem, but if you've replaced the microphone a damaged connector or component on the logic board is the next most likely cause to your problem. Logic board component repair IS NOT A DIY PROJECT. . . however complete replacement of the logic board is.

Good Luck,

If this answer is acceptable please remember to return and mark it.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 2,234