Ir para o conteúdo principal

The iMac G5, powered by the PowerPC G5 processor, was originally released in August 2004.

453 Perguntas Visualizar todos
Pergunta encerrada

Disk partition failed with errors

Hi, I installed a new seagate barracuda 500Gb and the computer does not recognize it. I go to disk utilities and I see it but if I try to partition/erase it says ..failed with errors. input/output errors. PLEASE HELP

Thank You

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

If there are jumpers on the drive remove them and try again. You might be running a SATA II or III connector on a SATA I machine. There have been many reports of problems with "backward compatibility" on some of the new SATA III drives.

If this Answer is helpful please remember to return and mark it Accepted.

Esta resposta foi útil?

Pontuação 1

2 comentários:

Thank you for replying'

No jumpers, I think you're right about the SATA III backwards compatibility issues..I even partitioned it using an Imac with 10.6.8 and when I put the hardrive back it showed up as disk01 unmounted.

Do not know what else to do

por

Contact the vendor and see if you can return/exchange it for a compatible drive.

por

Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 190