Ir para o conteúdo principal

A linha de laptops MacBook Pro da Apple foi concebida para usuários avançados e profissionais. Atualmente, a linha MacBook Pro inclui as variantes de 13, 14, 15, 16 e 17 polegadas, com revisões maiores definidas pelos designs Pré-monobloco (original), monobloco, tela Retina, Touch Bar e SOC (system-on-a-chip).

19945 Perguntas Visualizar todos

How do I clone a windows drive?

I want to partition a 750gb hard drive on my mac so I can run windows 7 on one partition and mac os on the other. I have a 160gb windows drive that I want to clone and install on my mac.

How do I do that?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

3 respostas

Solução escolhida

This get tricky as your not really running Windows alone here. If your were you would use a Windows cloning app. Here you can't as these apps go down to the file system block level (true cloning vs imaging).

Look for a Mac app that can do FAT32/NTFS file systems or use a Windows backup or file imaging program and not try to clone.

You could also use a syncing program to copy over to a network volume on to your own file server (or internet backup type of service - iCloud)

Esta resposta foi útil?

Pontuação 0

1 comentário:

I've used PartImage ( http://en.wikipedia.org/wiki/Partimage ) to great success in the past.

por

Adicionar um comentário
Pergunta mais útil

In my shop I use apps by Paragon Software. It will do NTFS/Mac/Linux, from partitioning, cloning drives, backups and even make bootable recovery images of your OS. Worth taking a look.

I would use OS/X install and set it up to dual boot, one partition for OS/X and the other for windows. It should create a small partition for the boot manager so you can select which partition to boot to OS/X or Windows.

Once you have that set up, then use Paragon to image your other drive over to the Windows partition. Note, however, if you pulled that Windows drive from a PC, it may take it some time (if it loads) to find the new drivers, etc, to match the hardware on your mac.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Larry -

Don't forget to setup your Windows partition within Apples BootCamp application before installing Windows and your Windows apps & data.

Also, make sure to make a good backup of your current Mac volume before you start altering the partitions.

You may want to think about getting a larger drive to swap out with your current one. Then put your current HD into an external case. This gives you a clean slate to configure your HD for OS-X, BootCamp & Windows with plenty of space for apps & data for both.

Your other option here is using a virtual machine (VM) to run windows in using VMware Fusion or Parallels Desktop. These run within Mac OS-X as such you don't need to create a FAT or NTFS partition instead they create a storage drawer within your current Mac volume to hold your windows apps & data.

Heres a good rundown on the differences Best VM for Mac

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

larrypierceall será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 7,070