Ir para o conteúdo principal

Repair information and guides for the CDMA version of the fourth generation iPhone. Model: A1349 / 8, 16, or 32 GB storage capacity

295 Perguntas Visualizar todos
Pergunta encerrada

After taking apart my Power button it wont click anymore?

Hey ,

So I recently purchased a used midframe with parts from ebay

everything worked but the power button would not click so I toook the two screws which held the button in place and i couldnt figure it out

So i did the same to another midframe I had which did click to see any diffrence

After putting the one the clicked back together it refuses to click

its just like the one that didnt click and I cant figure out whats wrong with it

the black dot is there and I followed the guide on ifixit and it WAS working

Someone please help me

thanks alot

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
1 comentário

When you use the Pwr button, even though it doesn't click, does it work like it's supposed too ?

por

Adicionar um comentário

2 respostas

Pergunta mais útil

screws could be too tight

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

I just replaced a power/lock button on a friends iPhone, and I can 95% guarantee you that you have the screws too tight. The screws on an iphone should be hand tight for the most part. Try removing the internals again and leaving the power/lock button installed. Now back the screws out in small increments. This should illustrate that loosening the screws will allow the button to operate.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 880