Ir para o conteúdo principal

Versão renovada do iPhone 3G com velocidades de processamento mais rápidas. O reparo deste dispositivo é semelhante ao do 3G e requer simples chaves de fenda e ferramentas de abertura. Modelo A1303 / 8 GB,16 GB ou 32 GB de capacidade / Parte traseira em plástico preto ou branco.

1500 Perguntas Visualizar todos
Pergunta encerrada

Power button not working after flex cable replacement

Hello,

I have an Iphone 3gs that the power button didn't work so, I replaced the flex cable thinking that it was bad. Wow, what a feat! I got the phone re-assembled and it still does not work. All of the other buttons, volume up/down, mute switch, headphone jack, work as they should. This is the same behavior that it was doing before I replaced the flex cable. Is there something on the logic board that is causing the issue? I don't want to go through the painstaking task of putting in another cable. Is there something else that I can try?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

are you sure it makes good contact? sometimes i have to bend the 2 legs a little

Esta resposta foi útil?

Pontuação 0

1 comentário:

Yes, I double checked the connections. Like I said, the volume buttons, headphone jack and the mute switch all work just fine. It's just that darn power switch.

por

Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 484