I was repairing my screen, As i put the final touch on my phone the battery connector on the motherboard fell off to the battery. I tried soldering it but they are just to small! What can i do, I've watched a million videos and I've put everything together right its just that one thing!
Esta é uma boa pergunta?
Rep: 6,1 mil
15
20
5
you need a smaller soldering tip, i think there is no other solution than soldering
Esta resposta foi útil?
Rep: 301
3
1
Yes the soldering tip is important BUT you really need to have a solder scope (microscope) so that you can see what you are doing. Those solder pads are 1 mm x 1 mm and if you need to overlap solder them into the traces it becomes even more difficult. We see these repairs every day and would not tackle it without the proper magnification (and solder tip).
Let us know if you have further questions.
Rick
Florida iDoctor
Esta resposta foi útil?
Is there a place to buy a solderscope or is it possible to get a new motherboard for certain electronics like an original Nest Cam?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 905
1 comentário
Please do not use more than one username on here. you really should only have one "personality"
por oldturkey03