SOLUCIONADA: Faulty MagSafe DC-In Board? - MacBook Pro 13" Unibody Early 2011

Faulty MagSafe DC-In Board?

I have a problem get the charger to my Macbook Pro 13" 2011 working, have bought three chargers which all is still working on other Macbooks, but only work rarely on mine.

It have never been dropped or in any harms way and the chargers have always been plugged in with surge-protected plugs.

Could this be the MagSafe DC-In Board or should I look into other tests or parts? Tried everything I can come up with without changing any parts.

Thanks in advance,

Claes

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação -1

Postado: 27 de set de 2012

Opções

Yes - if you are having charging problems it could be the DC in board, it might also be your battery. Look at Utilities:System Profiler->Power and see what it can tell you about the status of the battery and charger.

If this answer was helpful please remember to return and mark it Accepted.

Esta resposta foi útil?

Sim Não

Pontuação 2

1 comentário:

Thank you for your answer. The battery seems fine in the profiler (300 cycles), and the charger works very well when it is working at all. Noticed that it sometimes stop charging when the MBP is moved.

Found an apple service provider that is willing to do a check for errors with no cost so I will do that and share their findings here.

1 de out de 2012 por Claes Olofsson

Adicionar um comentário

MacBook Pro 13" Unibody Early 2011

Faulty MagSafe DC-In Board?

1 resposta

Adicionar a sua resposta