Ir para o conteúdo principal
Ajuda

Versão atual de: Jacob Mehnert

Título:

Bogs then stops at full throttle

Texto:

Okay so here’s what I’ve done.
-1 compression 110
-
-2 muffler and screen cleaned inside the muffler to the cylinder. Carbon free now
-
-3 new carb fuel filter
-
-4 new spark plug
-
-5 adjustable screw under primer bulb worked with all adjustments to flow were the same unless I closed it up then it died no pulling needed. As I said when you open it up it sounds and performs the same idles good throttle up head spins for a second bogs down stops
-
+# Compression 110
+# Muffler and screen cleaned inside the muffler to the cylinder. Carbon free now
+# Installed a new carb fuel filter
+# Installed a new spark plug
+# Adjusted the screw under primer bulb worked with all adjustments to flow were the same unless I closed it up then it died no pulling needed. As I said when you open it up it sounds and performs the same idles good throttle up head spins for a second bogs down stops
I can not figure this out it takes 5 pulls to achieve 110 compression. Is my motor burned up or what? It’s starts will stay running sounds good

Dispositivo:

Echo Trimmer SRM266 2020

Status:

open

Editado por: Jonathan Dorian

Título:

Bogs then stops at full throttle

Texto:

Okay so here’s what I’ve done.
1 compression 110
-2 muffler and screen cleaned inside of o the cylinder.
+2 muffler and screen cleaned inside the muffler to the cylinder. Carbon free now
3 new carb fuel filter
4 new spark plug
5 adjustable screw under primer bulb worked with all adjustments to flow were the same unless I closed it up then it died no pulling needed. As I said when you open it up it sounds and performs the same idles good throttle up head spins for a second bogs down stops
I can not figure this out it takes 5 pulls to achieve 110 compression. Is my motor burned up or what? It’s starts will stay running sounds good

Dispositivo:

Echo Trimmer SRM266 2020

Status:

open

Postagem original de: Jonathan Dorian

Título:

Bogs then stops at full throttle

Texto:

Okay so here’s what I’ve done.

1 compression 110

2 muffler and screen cleaned inside of o the cylinder.

3 new carb fuel filter

4 new spark plug

5 adjustable screw under primer bulb worked with all adjustments to flow were the same unless I closed it up then it died no pulling needed. As I said when you open it up it sounds and performs the same idles good throttle up head spins for a second bogs down stops

I can not figure this out it takes 5 pulls to achieve 110 compression. Is my motor burned up or what? It’s starts will stay running sounds good

Dispositivo:

Echo Trimmer SRM266 2020

Status:

open