Ir para o conteúdo principal
Ajuda

Versão atual de: Sterling Hirsh ,

Texto:

-Check to see if this new drive had a jumper pin located on the Harddrive - usually jumping 2 of the 4 pins that are separate from the others. remove this pin, otherwise the system will not see the drive.
+Check to see if this new drive had a jumper (small plastic piece) located on the Harddrive - usually connecting 2 of the 4 pins that are separate from the others. Remove this jumper, otherwise the system will not see the drive.

Status:

open

Editado por: matthewfrey ,

Texto:

-Check to see if this new drive had a jumper pin located on the Harddrive - usually jumping 2 or the 4 pins that are separate from the others. remove this pin, otherwise the system will not see the drive.
+Check to see if this new drive had a jumper pin located on the Harddrive - usually jumping 2 of the 4 pins that are separate from the others. remove this pin, otherwise the system will not see the drive.

Status:

open

Mensagem original de: matthewfrey ,

Texto:

Check to see if this new drive had a jumper pin located on the Harddrive - usually jumping 2 or the 4 pins that are separate from the others.    remove this pin, otherwise the system will not see the drive.

Status:

open