How to ground a wire when all GDNs on the connector are occupied?
Texto:
Hi community! I am wondering if you guys can help me out.
I have a KD-65X9005A Sony 4k LED TV. I'm getting the 4 blinking red LEDs error code.
Online research tells me there is a backlight error and I can bypass it by grounding out the wire that sends the error signal to the main board. I know it won't fix the underlying issue but chances are my TV will work just fine for the time being - once I disable the error signal.
I think I have located the board in question:
[image|3233267]
And here is the connector with the error pin:
[image|3233263]
And here is the complete back of my tv:
[image|3233273]
***2 questions:***
1) Did I mark the BL_ERR pin correctly?
***2) How do I ground the wire?*** As you guys can see all my GDNs are occupied. Really not sure what to do.
I can upload more pictures if needed.
Thanks in advance! Your help is highly appreciated!
How to ground a wire when all GDNs on the connector are occupied?
Texto:
Hi community! I am wondering if you guys can help me out.
I have a KD-65X9005A Sony 4k LED TV. I'm getting the 4 blinking red LEDs error code.
Online research tells me there is a backlight error and I can bypass it by grounding out the wire that sends the error signal to the main board. I know it won't fix the underlying issue but chances are my TV will work just fine for the time being - once I disable the error signal.
I think I have located the board in question:
[image|3233267]
And here is the connector with the error pin:
[image|3233263]
And here is the complete back of my tv:
[image|3233273]
***2 questions:***
1) Did I mark the BL_ERR pin correctly?
***2) How do I ground the wire?*** As you guys can see all my GDNs are occupied. Really not sure what to do.
I can upload more pictures if needed.
Thanks in advance! Your help is highly appreciated!
How to ground a wire when all GDNs on the connector are occupied?
Texto:
Hi community! I am wondering if you guys can help me out.
I have a KD-65X9005A Sony 4k LED TV. I'm getting the 4 blinking red LEDs error code.
Online research tells me there is a backlight error and I can bypass it by grounding out the wire that sends the error signal to the main board. I know it won't fix the underlying issue but chances are my TV will work just fine for the time being - once I disable the error signal.
I think I have located the board in question:
[image|3233267]
And here is the connector with the error pin:
[image|3233263]
And here is the complete back of my tv:
[image|3233273]
***2 questions:***
1) Did I mark the BL_ERR pin correctly?
***2) How do I ground the wire?*** As you guys can see all my GDNs are occupied. Really not sure what to do.
I can upload more pictures if needed.
Thanks in advance! Your help is highly appreciated!
How to ground a wire when all GDNs on the connector are occupied?
Texto:
Hi community! I am wondering if you guys can help me out.
I have a KD-65X9005A Sony 4k LED TV. I'm getting the 4 blinking red LEDs error code.
Online research tells me there is a backlight error and I can bypass it by grounding out the wire that sends the error signal to the main board. I know it won't fix the underlying issue but chances are my TV will work just fine for the time being - once I disable the error signal.
I think I have located the board in question:
[image|3233267]
And here is the connector with the error pin:
[image|3233263]
And here is the complete back of my tv:
[image|3233273]
***2 questions:***
1) Did I mark the BL_ERR pin correctly?
***2) How do I ground the wire?*** As you guys can see all my GDNs are occupied. Really not sure what to do.
I can upload more pictures if needed.
Thanks in advance! Your help is highly appreciated!
How to ground a wire when all GDNs on the connector are occupied?
Texto:
Hi community! I am wondering if you guys can help me out.
I have a KD-65X9005A Sony 4k LED TV. I'm getting the 4 blinking red LEDs error code.
Online research tells me there is a backlight error and I can bypass it by grounding out the wire that sends the error signal to the main board. I know it won't fix the underlying issue but chances are my TV will work just fine for the time being - once I disable the error signal.
I think I have located the board in question:
[image|3233267]
And here is the connector with the error pin:
[image|3233263]
And here is the complete back of my tv:
[image|3233273]
***2 questions:***
1) Did I mark the BL_ERR pin correctly?
***2) How do I ground the wire?*** As you guys can see all my GDNs are occupied. Really not sure what to do.
I can upload more pictures if needed.
Thanks in advance! Your help is highly appreciated!