I’ll warn you even if you get the caps off you may not be able to rotate the stand around that way. Looking at X-Ray from the [guide|142850] it looks like they are press-fitted and maybe even glued!
[image|2550643]
You’ll need to be aggressive to get them out drilling is about the only way I can see as workable.
The better way would be to get to the screws from the inside removing the stand and then flipping it over
[image|2550644]
I don’t see any indexing in the hinge part so that should work. At least you won’t mar up the hinge allowing you to flip it back to resell your system when you upgrade again ;-}
+
+
You might even be able to locate the VESA mount parts to switch it fully over.
I’ll warn you even if you get the caps off you may not be able to rotate the stand around that way. Looking at X-Ray from the [guide|142850] it looks like they are press-fitted and maybe even glued!
[image|2550643]
You’ll need to be aggressive to get them out drilling is about the only way I can see as workable.
The better way would be to get to the screws from the inside removing the stand and then flipping it over
[image|2550644]
-
I don’t see any indexing in the hinge part so that should work. At least you won’t mar up the hinge allowing you to file it back to reset your system when you upgrade again ;-}
+
I don’t see any indexing in the hinge part so that should work. At least you won’t mar up the hinge allowing you to flip it back to resell your system when you upgrade again ;-}
I’ll warn you even if you get the caps off you may not be able to rotate the stand around that way. Looking at X-Ray from the [guide|142850]
+
I’ll warn you even if you get the caps off you may not be able to rotate the stand around that way. Looking at X-Ray from the [guide|142850] it looks like they are press-fitted and maybe even glued!
[image|2550643]
You’ll need to be aggressive to get them out drilling is about the only way I can see as workable.
The better way would be to get to the screws from the inside removing the stand and then flipping it over
[image|2550644]
I don’t see any indexing in the hinge part so that should work. At least you won’t mar up the hinge allowing you to file it back to reset your system when you upgrade again ;-}
I’ll warn you even if you get the caps off you may not be able to rotate the stand around that way. Looking at X-Ray from the [guide|142850]
[image|2550643]
You’ll need to be aggressive to get them out drilling is about the only way I can see as workable.
The better way would be to get to the screws from the inside removing the stand and then flipping it over
[image|2550644]
I don’t see any indexing in the hinge part so that should work. At least you won’t mar up the hinge allowing you to file it back to reset your system when you upgrade again ;-}