Ir para o conteúdo principal
Ajuda

Versão atual de: Dan ,

Texto:

The trick is to slide the bottom cover to the front and then lift.
I sometimes find junk has gotten into the grove area which stops it from sliding forward. I do two things I use strong duct tape to create a handle to pull forward on the front half of the cover and leave space in the center for a good suction cup to pull up and a second set of hands to hold the system. Then dripping some isopropyl alcohol along the left and right side gaps to help break the seal.
[image|2418208]
[image|2418211]
[image|2418212]
+
+=== Update (06/03/2021) ===
+13” model
+
+[image|2418319]

Status:

open

Editado por: Dan ,

Texto:

The trick is to slide the bottom cover to the front and then lift.
I sometimes find junk has gotten into the grove area which stops it from sliding forward. I do two things I use strong duct tape to create a handle to pull forward on the front half of the cover and leave space in the center for a good suction cup to pull up and a second set of hands to hold the system. Then dripping some isopropyl alcohol along the left and right side gaps to help break the seal.
+
+[image|2418208]
+
+[image|2418211]
+
+[image|2418212]

Status:

open

Mensagem original de: Dan ,

Texto:

The trick is to slide the bottom cover to the front and then lift.

I sometimes find junk has gotten into the grove area which stops it from sliding forward. I do two things I use strong duct tape to create a handle to pull forward on the front half of the cover and leave space in the center for a good suction cup to pull up and a second set of hands to hold the system. Then dripping some isopropyl alcohol along the left and right side gaps to help break the seal.

Status:

open