Ir para o conteúdo principal
Ajuda

Versão atual de: tojaert ,

Texto:

hello Expolosions&,
 
those don't exist. All we use is knowledge and experience in electronics gained through years of work.
 
I would use 120ohm/450mA circ.20%. If it can't stand it change on 240ohm / 350mA circ.20%. That’s all.
 
* regards,
=== Update (01/25/2021) ===
hello Explosions &…
 
its absolutely 240/350mA 0201 coil in VDD_screen line, connected to 3 near connector pins and small capacitor right. The other side goes straight to 8566 backlight ic (see picture).
 
* regards
[image|2308489]

Status:

open

Mensagem original de: tojaert ,

Texto:

hello Expolosions&,

those don't exist. All we use is knowledge and experience in electronics gained through years of work.

I would use 120ohm/450mA circ.20%. If it can't stand it change on 240ohm / 350mA circ.20%. That’s all.

* regards,

Status:

open