Ir para o conteúdo principal
Ajuda

Mensagem original de: oldturkey03 ,

Texto:

you could try to put it inot test mode "To enter the HEC Dealer Test Mode, depress and hold the instrument cluster SELECT/RESET button, turn the ignition switch to the RUN position, and then continue pressing the SELECT/RESET button (5 seconds) until tESt is displayed in the odometer. � The SELECT/RESET button must be released within three seconds of the odometer tESt display to begin the dealer test mode. � Depress the SELECT/RESET button to advance through the following steps until dtc is displayed. � Depressing the SELECT/RESET button will display any stored continuous DTCs before proceeding to the next step." BTW there was a big stink in England a few years ago about having to replace the clusteres. You might want to check with your dealer.  [http://www.focushacks.com/?modid=37&ht=Instrument%20Cluster%20Test%20and%20Diagnostic%20Mode|Here is] the complete hack for the dash. See what you come up with.

Status:

open