Versão atual de: oldturkey03, Vendredi, Guillaume Malecha, Jacob Mehnert, and BenZ78 (detalhes da avaliação)

Título:

Dryer begins to spin but slowly stops

Texto:

Frigidaire EGZ831AS1

Drying just started acting up.

Drying currently empty, Start attempt. Will turn approximately 1/4 rotation, Can hear motor trying but stops. [br]

Try again, Unit maybe turns 1/8 to same result. Then eventually will not turn at all but I can hear motor trying.

Tub (sorry for not exact terminology) has some give it in it currently on the front. Feel like it might be off balance. Not sure how I would take apart to check as I cannot find a manual for this old girl.

After about 10 minutes I can try again and it starts the same scenario (only reason I did this is I needed to prove to the misses that I wasn’t being lazy it actually didn’t work :-D) Don’t want to burn out motor (anymore then it potentially is) Let me know what you guys think.

Thanks

Jared

Dispositivo:

Combo Washer Dryer

Status:

open

Resposta aceita:

Postagem original de: Jared S

Título:

Dryer begins to spin but slowly stops

Texto:

Frigidaire EGZ831AS1

Drying just started acting up.

Drying currently empty, Start attempt. Will turn approximately 1/4 rotation, Can hear motor trying but stops. [br]

Try again, Unit maybe turns 1/8 to same result. Then eventually will not turn at all but I can hear motor trying.

Tub (sorry for not exact terminology) has some give it in it currently on the front. Feel like it might be off balance. Not sure how I would take apart to check as I cannot find a manual for this old girl.

After about 10 minutes I can try again and it starts the same scenario (only reason I did this is I needed to prove to the misses that I wasn’t being lazy it actually didn’t work :-D) Don’t want to burn out motor (anymore then it potentially is) Let me know what you guys think.

Thanks

Jared

Dispositivo:

Combo Washer Dryer

Status:

open