Ir para o conteúdo principal
Ajuda

Mensagem original de: Throttleton UK ,

Texto:

Hi guys,

I just had this problem on the rear case of my MacBook Pro.

4 of the 10 were rounded.

I managed to get them out by filling the tip of the Pentalobe Screwdriver.

The cheap one I used has a tapered tip, so if you file it, it gets slightly bigger/wider.

Once I feel it has a bite again on the screw, I used quite a bit of downforce to make sure it did not slip.

I got them all in the end, the screwdriver needed more filling for the worst of them.

I hope this helps :)

Status:

open