Pular para o conteúdo principal
Ajuda

Versão atual de: Adam ,

Texto:

If you're looking for apple part numbers on the required parts to do this job as it would have been from the factory I got you covered:
 
These part numbers are valid for the iMac 27" mid 2010
 
922-9531 - DC or "hair weave" cable. You need to replace the one your iMac has as it's got an extra SATA connection on it (if it didn't come with a SATA and SSD when you bought it).
 
922-9538 - Data cable for SSD (connects to logic board).
 
922-9485 - Pressure wall for SSD (SSD mounts on to this).
 
922-9488 - T8 screws. You will need 5 (1 for the pressure wall and 4 for the SSD).
 
I did this to my i7 and it was phenomenal. I install an intel 80 GB in mine. Granted I wouldn't recommend doing this unless you really know what you're doing. But if you do have fun!

Status:

open

Postagem original de: Adam ,

Texto:

If you're looking for apple part numbers on the required parts to do this job as it would have been from the factory I got you covered:

922-9531 - DC or "hair weave" cable. You need to replace the one your iMac has as it's got an extra SATA connection on it (if it didn't come with a SATA and SSD when you bought it).

922-9538 - Data cable for SSD (connects to logic board).

922-9485 - Pressure wall for SSD (SSD mounts on to this).

922-9488 - T8 screws. You will need 5 (1 for the pressure wall and 4 for the SSD).

I did this to my i7 and it was phenomenal. I install an intel 80 GB in mine. Granted I wouldn't recommend doing this unless you really know what you're doing. But if you do have fun!

Status:

open