Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos



Mensagem original de: Jeff ,


BSOD is often caused by early HDD failure and can be confirmed by running an easy test. To run the check disk utility from Computer (My Computer), follow these steps:

# Boot into Windows 10
# Double-click on '''Computer''' (My Computer) to open it
# Select the drive you want to run a check on, e.g. C:# Right-click on the drive
# Click '''Properties'''
# Go to the '''Tools''' tab
# Select '''Check''', at the ''Error checking'' section
# If you receive the following message, click '''Scan drive''' to begin the scan:

[code]You don't need to scan this drive  We haven't found any errors on this drive. You can still scan the drive for errors if you want.  Scan Drive[/code]

# You can keep using the drive during the scan. If errors are found, you can decide if you want to fix them. Depending on the results of this scan, the utility will report the results:
** If no errors were found, you’ll see this message:

[code]Your drive was successfully scanned Windows successfully scanned the drive. No errors were found.[/code]

* If errors were found, you’ll see this message instead:

[code]Restart your computer to repair file system. You can restart right away or schedule the error fixing on next restart.[/code]