Pular para o conteúdo principal
Ajuda

Versão atual de: Jerry F Nerviano ,

Texto:

These are post codes (aka "beep" codes) that the BIOS gives when there's a hardware problem. Unfortunately, there's no universal standard for what means what between board manufacturers (or even between boards by the same!)
 
I'll need to know the exact model to be able to give you more than that.
 
Have you recently done anything with the memory or batteryother hardware? This might have something to do with it. Any details you could provide will help. I'll update my answer when I have more info to go on.
Have you recently done anything with the memory or batteryother hardware? This might have something to do with it. Any details you could provide will help. I'll update my answer when I have more info to go on.
 
In the meantime, here's a link to [http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07107&dlc=ar&lc=en&cc=us&jumpid=reg_R1002_USEN#N196|HP's troubleshooting guide for beep codes]. The list at the bottom does not give an explanation of this specific code, but the steps should be followed anyway. I've seen posts about this problem, but nobody had anything useful to say and were all old and closed.

Status:

open

Editado por: Jerry F Nerviano ,

Texto:

These are post codes (aka "beep" codes) that the BIOS gives when there's a hardware problem. Unfortunately, there's no universal standard for what means what between board manufacturers (or even between boards by the same!)
 
I'll need to know the exact model to be able to give you more than that.
 
Have you recently done anything with the memory or battery? This might have something to do with it. Any details you could provide will help. I'll update my answer when I have more info to go on.
 
Here'sIn the meantime, here's a link to [http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07107&dlc=ar&lc=en&cc=us&jumpid=reg_R1002_USEN#N196|HP's troubleshooting guide for beep codes]. The list at the bottom does not give an explanation of this specific code, but the steps should be followed anyway. I've seen posts about this problem, but nobody had anything useful to say and were all old and closed.
Here'sIn the meantime, here's a link to [http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07107&dlc=ar&lc=en&cc=us&jumpid=reg_R1002_USEN#N196|HP's troubleshooting guide for beep codes]. The list at the bottom does not give an explanation of this specific code, but the steps should be followed anyway. I've seen posts about this problem, but nobody had anything useful to say and were all old and closed.

Status:

open

Editado por: Jerry F Nerviano ,

Texto:

These are post codes (aka "beep" codes) that the BIOS gives when there's a hardware problem. Unfortunately, there's no universal standard for what means what between board manufacturers (or even between boards by the same!)
 
I'll need to know the exact model to be able to give you more than that.
 
Have you recently done anything with the memory or battery? This might have something to do with it. Any details you could provide will help. I'll update my answer when I have more info to go on.
 
Here's a link to [http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07107&dlc=ar&lc=en&cc=us&jumpid=reg_R1002_USEN#N196|HP's troubleshooting guide for beep codes]. The list at the bottom does not give an explanation of this specific code, but the steps should be followed anyway. I've seen posts about this problem, but nobody had anything useful to say and were all old and closed.

Status:

open

Postagem original de: Jerry F Nerviano ,

Texto:

These are post codes (aka "beep" codes) that the BIOS gives when there's a hardware problem. Unfortunately, there's no universal standard for what means what between board manufacturers (or even between boards by the same!)

I'll need to know the exact model to be able to give you more than that.

Have you recently done anything with the memory or battery? This might have something to do with it. Any details you could provide will help. I'll update my answer when I have more info to go on.

Status:

open