Ir para o conteúdo principal
Help

Current version by: Darren Grimes ,

Título:

Not booting past load screen

Text:

I have a MacBook A1342 that needed a logic board and keyboard replacement. When testing both the new board and keyboard everything worked fine. I had everything clipped in place but didn’t remove the old keyboard just yet. After doing a teardown and removing the old keyboard and replacing it with the new one and rebuilding the MacBook back together the laptop won’t boot past the load screen. All I have on the screen is the Apple Logo and the load bar goes half way across. It has been like this for about 2 days. So far, I can’t get into safe mode. Has anyone any ideas on what the problem could be?

dispositivo:

MacBook Unibody Model A1342

Status:

open

Accepted Answer:

573905

Original post by: Darren Grimes ,

Título:

Not booting past load screen

Text:

I have a MacBook A1342 that needed a logic board and keyboard replacement. When testing both the new board and keyboard everything worked fine. I had everything clipped in place but didn’t remove the old keyboard just yet. After doing a teardown and removing the old keyboard and replacing it with the new one and rebuilding the MacBook back together the laptop won’t boot past the load screen. All I have on the screen is the Apple Logo and the load bar goes half way across. It has been like this for about 2 days. So far, I can’t get into safe mode. Has anyone any ideas on what the problem could be?

dispositivo:

MacBook Unibody Model A1342

Status:

open