Skip to main content
Help

Original post by: Le Partisan Lab ,

Text:

Hi,

Can someone help me?[br]

[br]

I have a 2006 Mac Pro A1186, EMC 2113[br]

[br]

2.66QX/2x512/7300GT/250/SD[br]

[br]

SN: G863423BUQ2[br]

[br]

The issue is:[br]

[br]

[br]

[br]

Once working, there was a lightning nearby and It affected the mac...[br]

[br]

I Did some work on it bridging the power to a SD conected to the SATA for OD, and it worked greatly with 2x512mb+2x2gb+4x4gb=21Ram Total, working very nicely.[br]

[br]

Of course I could not use the 4 hdd bays, because the power source was affected in that area.[br]

[br]

[br]

[br]

I decided to get a new logic board and a new power source.[br]

[br]

The power is new and the logic came with the variant of being 2007.[br]

[br]

I connected all as it goes and I get power in the hhd bays. But as it starts, I dont get a chime, vents works normally, no video output.[br]

[br]

I tried removing the ram and using only a couple each test, and without it, removed SSD and all drives, removed OD, Video, BT, WIFI, USB, I tried all, but it always does the same at startup no chime, both vents normal, but no boot no video, nothing, oh and I get the mouse light on as if it was working.[br]

[br]

[br]

[br]

Please help! This is the las SS i got when it still worked

Status:

open