Skip to main content
Help

Original post by: Dan Dunham ,

Text:

well on the positive side it looks like all the connectors are intact so really what you need to do is figure out a way to keep the ram dimms in place.  I think what I would do is install the bottom ram dimm and then put something like a rubber band that has been cut in half so there is a buffer between the bottom and top ram dimm and then install the top ram dimm so that when its in place it puts enough presure on the bottom dimm so that the bottom ram dimm stays in place.

Than I would make a plastic strap that holds the top ram dimm in place.  it looks like you have a screw on each side of the dimm that you might be able to use to hold the plastic strap in place.  Let us know what you come up with.

Status:

open