Skip to main content
Help

Original post by: Dan Dunham ,

Text:

I think it would be extremely difficult for a person to replace these with standard soldering tools.  I think you would need some very specialized equipment to pull that off.   I also think it’s going to be costly to have a pro do it.

If the metal conductors are still there on the three broken sockets you should be able to try a rig something up that will hold the ram in place.  If the metal conductors are not there and have been ripped off the board then you are probably not going to be able to repair those.

I would think the best way to repair would be to see if there are any available on Ebay or some other place that sells used boards.

Post some pic’s,  of your rig and the damage that was done.   the community might have some idea

Status:

open