Pular para o conteúdo principal
Ajuda

Versão atual de: David ,

Título:

Replacement digitizer has rigid flex cable not allowing seating

Texto:

Replaced cracked digitizer only, not LDC. All went fine and works prior to adhesion.   But when I try to seat the digitizer on the frame where the ribbon cable reaches onto the board, the ribbon cables are so rigid I cannot seat the digitizer.

The cabling looks different than my original and part of it has adhesive tape, but I cannot tell where it should be stuck???   I thought the rear of the LCD but it pivots Portrait and the digitizer pivots landscape, so I wouldn’t be able to connect the cables.

Here you can see it in the second picture:     https://t-depot.com/ipad-2017-a1822-a1823-5th-gen-touch-screen-replacement.html

dispositivo:

iPad 5 Wi-Fi

Status:

open

Resposta Aceita:

529455

Postagem original de: David ,

Título:

Replacement digitizer has rigid flex cable not allowing seating

Texto:

Replaced cracked digitizer only, not LDC. All went fine and works prior to adhesion.   But when I try to seat the digitizer on the frame where the ribbon cable reaches onto the board, the ribbon cables are so rigid I cannot seat the digitizer.

The cabling looks different than my original and part of it has adhesive tape, but I cannot tell where it should be stuck???   I thought the rear of the LCD but it pivots Portrait and the digitizer pivots landscape, so I wouldn’t be able to connect the cables.

Here you can see it in the second picture:     https://t-depot.com/ipad-2017-a1822-a1823-5th-gen-touch-screen-replacement.html

dispositivo:

iPad 5 Wi-Fi

Status:

open