Pular para o conteúdo principal
Ajuda

Postagem original de: mayer ,

Texto:

You may try to purge the transaxle.

To purge the transaxle follow these steps:

1. Place tractor on an open level surface, clear of objects.

2. Turn engine off and apply parking brake.

3. Disengage transaxle by placing freewheel control in disengaged position.

4. Sitting in the tractor seat, start engine.

CAUTION: At any time during step 5 there may be movement of the drive wheels.

5. While the engine is running, move the throttle control to the slow position.

6. With motion control lever in neutral position, slowly disengage clutch/brake pedal (lifting foot off of the pedal).

7. Move motion control lever to full FORWARD position and hold for five (5) seconds.

8. Move motion control lever to full REVERSE position and hold for five (5) seconds.

9. Repeat steps 5 through 7, three (3) times.

10. Move motion control lever to neutral position.

11. Shut off engine and set parking brake.

13. Engage transaxle by placing freewheel control in engaged position.

14. Sitting in the tractor seat, start engine.

15. While engine is running, move throttle control to half (1/2) speed.

16. With motion control lever in neutral position, slowly disengage clutch/brake pedal.

17. Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position.

18. After the tractor moves approximately five (5) feet return the motion control lever to the neutral position.

19. Repeat steps 14-16, with the motion control lever three (3) times.

20. The transaxle is now purged and ready for normal operation.

Status:

open