Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda

Versão atual de: HER Zygiel (Herzygiel) ,

Título:

LCD Backlight problem I mac27 late 2013

Texto:

Hi All,
 
I have received the above imac for FREE : ) with the below issues and trying to figure out if it is worth to fix it. I hope you'll be able to help me out :)
 
Internal Dispaly is not working - external OK
 
Diagnostic LED's - 1,2,3 OK - 4 is off
 
Replaced LCD cable ( 2 pins were bent and sticked to each other )
 
I did a SMC/PVRAM Reset
 
A faint image is not visible ( checked in dark room and flashed the light on )
 
Run hardware test : may be an issue with System Management Controller PFM006 and with the display VFD001
 
The visual check showns blown part - as on the attached link( not shure if it has been caused by connecting a faulty cable and have not found logic board schematic to figure out what is it - fuse / capacitor etc....
 
Is there any way to test LCD panel it self ?
 
[image|1473466]
 
https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpg
 
Cheers
 
Pete
 
=== Update (06/05/2018) ===
 
The L4400 has now been replaced and the 4th LED is on !!! There is only a lot of stripes on my LCD unfortunetelly ....
 
[image|1475969]
 
What do you think guys ? is it dead display or something else ? - when I touch the LCD connector on the logic board the stripes are changing.......

dispositivo:

iMac Intel 27" EMC 2639

Status:

open

Resposta Aceita:

490396

Editado por: HER Zygiel (Herzygiel) ,

Título:

LCD Backlight problem I mac27 late 2013

Texto:

Hi All,
 
I have received the above imac for FREE : ) with the below issues and trying to figure out if it is worth to fix it. I hope you'll be able to help me out :)
 
Internal Dispaly is not working - external OK
 
Diagnostic LED's - 1,2,3 OK - 4 is off
 
Replaced LCD cable ( 2 pins were bent and sticked to each other )
 
I did a SMC/PVRAM Reset
 
A faint image is not visible ( checked in dark room and flashed the light on )
 
Run hardware test : may be an issue with System Management Controller PFM006 and with the display VFD001
 
The visual check showns blown part - as on the attached link( not shure if it has been caused by connecting a faulty cable and have not found logic board schematic to figure out what is it - fuse / capacitor etc....
 
Is there any way to test LCD panel it self ?
 
[image|1473466]https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpgimage|1473466]

https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpg
[image|1473466]https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpgimage|1473466]

https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpg
 
Cheers
 
Pete

dispositivo:

iMac Intel 27" EMC 2639

Status:

open

Resposta Aceita:

490396

Editado por: oldturkey03 ,

Título:

LCD Backlight problem I mac27 late 2013

Texto:

Hi All,
 
I have received the above imac for FREE : ) with the below issues and trying to figure out if it is worth to fix it. I hope you'll be able to help me out :)
 
Internal Dispaly is not working - external OK
 
Diagnostic LED's - 1,2,3 OK - 4 is off
 
Replaced LCD cable ( 2 pins were bent and sticked to each other )
 
I did a SMC/PVRAM Reset
 
A faint image is not visible ( checked in dark room and flashed the light on )
 
Run hardware test : may be an issue with System Management Controller PFM006 and with the display VFD001
 
The visual check showns blown part - as on the attached link( not shure if it has been caused by connecting a faulty cable and have not found logic board schematic to figure out what is it - fuse / capacitor etc....
 
Is there any way to test LCD panel it self ?
 
https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpg[image|1473466]https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpg
https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpg[image|1473466]https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpg
 
Cheers
 
Pete

dispositivo:

iMac Intel 27" EMC 2639

Status:

open

Mensagem original de: HER Zygiel (Herzygiel) ,

Título:

LCD Backlight problem I mac27 late 2013

Texto:

Hi All,

I have received the above imac for FREE : ) with the below issues and trying to figure out if it is worth to fix it. I hope you'll be able to help me out :)

Internal Dispaly is not working - external OK

Diagnostic LED's - 1,2,3 OK -   4 is off

Replaced LCD cable ( 2 pins were bent and sticked to each other )

I did a SMC/PVRAM Reset

A faint image is not visible ( checked in dark room and flashed the light on )

Run hardware test : may be an issue with System Management Controller PFM006 and with the display VFD001

The visual check showns blown part  - as on the attached link( not shure if it has been caused by connecting a faulty cable and have not found logic board schematic to figure out what is it - fuse / capacitor etc....

Is there any way to test LCD panel it self ?

https://s33.postimg.cc/vk0hkmpvj/de29ee7d-b8aa-4d96-8db6-5d0e04ff25f7.jpg

Cheers

Pete

dispositivo:

iMac Intel 27" EMC 2639

Status:

open