Ir para o conteúdo principal
Ajuda

Versão atual de: MangaX ,

Título:

Connect 2 controllers into a single port?

Texto:

== Setup ==

I know this is an odd question, but I'm making an NES,  bar-top arcade using 2 NES Advantage joysticks as the primary controllers.  However, I thought it would be great to have the light-gun or classic controller available as well, but without having to manually un-plug one, then plug-in the other.

== Question ==

Would it be possible to have multiple, controllers wired into a single port, or would it negatively affect the voltage to the point of not working?

┌── Controller 1

├─> NES  (Player 1 port)

└── Controller 2

=== Update (05/15/2018) ===

After considerable research, it looks like there are two options ...

A 6PDT switch (since one connection is just a ground wire) -- Enabling controllers to be selected by flipping the switch.

[image|1456103]

Or, have each wire split between controllers using a 2 input diode AND gate.

[image|1456105]

''[https://forums.nesdev.com/viewtopic.php?f=5&t=16041|Courtesy of the NesDev forum.]''

dispositivo:

Nintendo Entertainment System

Status:

open

Resposta Aceita:

485202

Editado por: MangaX ,

Título:

Connect 2 controllers into a single port?

Texto:

== Setup ==
 
I know this is an odd question, but I'm making an NES, bar-top arcade using 2 NES Advantage joysticks as the primary controllers. However, I thought it would be great to have the light-gun or classic controller available as well, but without having to manually un-plug one, then plug-in the other.
 
== Question ==
 
Would it be possible to have multiple, controllers wired into a single port, or would it negatively affect the voltage to the point of not working?
 
┌── Controller 1
 
├─> NES (Player 1 port)
 
└── Controller 2
 
=== Update (05/15/2018) ===
 
After considerable research, it looks like there are two options ...
 
A 6PDT switch (since one connection is just a ground wire) -- Enabling controllers to be selected by flipping the switch.
 
[image|1456103]
 
Or, have each wire split between controllers using a 2 input diode AND gate.
 
[image|1456105]
 
''[https://forums.nesdev.com/viewtopic.php?f=5&t=16041|Courtesy of the NesDev forum.]''

dispositivo:

Nintendo Entertainment System

Status:

open

Mensagem original de: MangaX ,

Título:

Connect 2 controllers into a single port?

Texto:

== Setup ==

I know this is an odd question, but I'm making an NES,  bar-top arcade using 2 NES Advantage joysticks as the primary controllers.  However, I thought it would be great to have the light-gun or classic controller available as well, but without having to manually un-plug one, then plug-in the other.

== Question ==

Would it be possible to have multiple, controllers wired into a single port, or would it negatively affect the voltage to the point of not working?

┌── Controller 1

├─> NES  (Player 1 port)

└── Controller 2

dispositivo:

Nintendo Entertainment System

Status:

open