Pular para o conteúdo principal
Ajuda

Versão atual de: originalmachead and oldturkey03 (detalhes da votação) ,

Título:

HDD Errors (UDMA CRC Errors)

Texto:

Hi,

In the SMART Utility log file I noticed that my HHD had a high number of CRC Errors. I replaced the HDD with a new Hitachi Travelstart 500G HDD, and still got the same errors. I also replaced the HDD Cable: same result the errors still occur.

See SMART Utility log file below.

Could there be something wrong with my motherboard?

Am I at risk to loose data?

Regards

Erik.

SMART log file:

location: /dev/disk0

partition count: 1

partitions: Macintosh HD,

SMART Support: Supported

Last SMART Error: *not set*

Model Family: *not set*

Model: Hitachi HTS725050A9A364

Serial Number: 101128PCK404GLG2GU4J

Firmware Version: PC4OC70E

Capacity: 500,107,862,016 bytes

ATA Version: 8

ATA Standard: ATA-8-ACS revision 6

Health: Passed

Overall Health: PASSED

Offline Data Status: 0

Self Test Status: 0

Offline Data Collection Time: 645

Data Collection Capabilities: 5B

SMART Capabilities: 3

Error Logging Capabilities: 1

Short Self Test Time: 2

Long Self Test Time: 131

Conveyance Self Test Time: 0

Attribute Log Revision: 16

Attribute Count: 19

Attributes:

ID#   ATTRIBUTE NAME                         FLAG       VALUE   WORST   THRESH  TYPE         UPDATED     FAILED    RAW VALUE

1     Raw Read Error Rate                    0x000B     100     100     062     Pre-fail     Always      Never     0

2     Throughput Performance                 0x0005     100     100     040     Pre-fail     Offline     Never     0

3     Spin Up Time                           0x0007     173     173     033     Pre-fail     Always      Never     2

4     Start/Stop Count                       0x0012     100     100     000     Old age      Always      Never     136

5     Reallocated Sector Count               0x0033     100     100     005     Pre-fail     Always      Never     0

7     Seek Error Rate                        0x000B     100     100     067     Pre-fail     Always      Never     0

8     Seek Time Performance                  0x0005     100     100     040     Pre-fail     Offline     Never     0

9     Power On Hours                         0x0012     100     100     000     Old age      Always      Never     75

10    Spin Retry Count                       0x0013     100     100     060     Pre-fail     Always      Never     0

12    Power Cycle Count                      0x0032     100     100     000     Old age      Always      Never     73

191   G-Sense Error Rate                     0x000A     100     100     000     Old age      Always      Never     0

192   Power Off Retract Count                0x0032     100     100     000     Old age      Always      Never     1

193   Load Cycle Count                       0x0012     099     099     000     Old age      Always      Never     13221

194   Temperature Celsius                    0x0002     229     229     000     Old age      Always      Never     24 (Lifetime Min/Max 15/39)

196   Reallocated Event Count                0x0032     100     100     000     Old age      Always      Never     0

197   Current Pending Sector Count           0x0022     100     100     000     Old age      Always      Never     0

198   Offline Uncorrectable Sector Count     0x0008     100     100     000     Old age      Offline     Never     0

199   UDMA CRC Error Count                   0x000A     200     200     000     Old age      Always      Never     143

223   Load Retry Count                       0x000A     100     100     000     Old age      Always      Never     0

Error Log Version: 1

Error Count: 75

Error Log:

Error 75 occured at disk power-on lifetime: 75 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:13:12.500  READ LOG EXT

60 00 30 88 40 67 40 00      00:13:12.500  READ FPDMA QUEUED

60 E8 28 F0 D5 66 40 00      00:13:12.500  READ FPDMA QUEUED

60 10 20 E0 D5 66 40 00      00:13:12.500  READ FPDMA QUEUED

60 08 18 D8 D5 66 40 00      00:13:12.500  READ FPDMA QUEUED

Error 74 occured at disk power-on lifetime: 74 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:01:32.500  READ LOG EXT

60 B8 F8 68 1B 93 40 00      00:01:32.500  READ FPDMA QUEUED

60 00 F0 68 13 93 40 00      00:01:32.500  READ FPDMA QUEUED

60 00 E8 68 0B 93 40 00      00:01:32.500  READ FPDMA QUEUED

60 00 E0 68 03 93 40 00      00:01:32.400  READ FPDMA QUEUED

Error 73 occured at disk power-on lifetime: 70 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:37:53.600  READ LOG EXT

60 50 B8 08 55 54 40 00      00:37:53.500  READ FPDMA QUEUED

60 A8 B0 58 4F 54 40 00      00:37:53.500  READ FPDMA QUEUED

60 00 A8 58 47 54 40 00      00:37:53.500  READ FPDMA QUEUED

60 78 A0 E0 41 54 40 00      00:37:53.500  READ FPDMA QUEUED

Error 72 occured at disk power-on lifetime: 69 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:52:46.300  READ LOG EXT

60 00 30 A8 79 BD 40 00      00:52:46.200  READ FPDMA QUEUED

60 00 28 A8 77 BD 40 00      00:52:46.200  READ FPDMA QUEUED

60 00 20 A8 76 BD 40 00      00:52:46.200  READ FPDMA QUEUED

60 80 18 28 76 BD 40 00      00:52:46.200  READ FPDMA QUEUED

Error 71 occured at disk power-on lifetime: 68 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:36:21.200  READ LOG EXT

60 40 F0 28 B6 B0 40 00      00:36:21.200  READ FPDMA QUEUED

60 40 E8 E8 B5 B0 40 00      00:36:21.200  READ FPDMA QUEUED

60 40 E0 A8 B5 B0 40 00      00:36:21.200  READ FPDMA QUEUED

60 40 D8 68 14 B0 40 00      00:36:21.200  READ FPDMA QUEUED

Self Test Log Revision: 1

Self Test Log Count: 2

Self Test Log:

Num  Test_Description    Status                   Remaining  LifeTime(hours)  LBA_of_first_error

# 1  Extended offline    Completed without error         0%        74         -
# 2  Short offline       Completed without error         0%        11         -

dispositivo:

MacBook Pro 15" Unibody 2.53 GHz Mid 2009

Status:

open

Resposta Aceita:

45722

Postagem original de: Erik253 ,

Título:

HDD Errors (UDMA CRC Errors)

Texto:

Hi,

In the SMART Utility log file I noticed that my HHD had a high number of CRC Errors. I replaced the HDD with a new Hitachi Travelstart 500G HDD, and still got the same errors. I also replaced the HDD Cable: same result the errors still occur.

See SMART Utility log file below.

Could there be something wrong with my motherboard?

Am I at risk to loose data?

Regards

Erik.

SMART log file:

location: /dev/disk0

partition count: 1

partitions: Macintosh HD,

SMART Support: Supported

Last SMART Error: *not set*

Model Family: *not set*

Model: Hitachi HTS725050A9A364

Serial Number: 101128PCK404GLG2GU4J

Firmware Version: PC4OC70E

Capacity: 500,107,862,016 bytes

ATA Version: 8

ATA Standard: ATA-8-ACS revision 6

Health: Passed

Overall Health: PASSED

Offline Data Status: 0

Self Test Status: 0

Offline Data Collection Time: 645

Data Collection Capabilities: 5B

SMART Capabilities: 3

Error Logging Capabilities: 1

Short Self Test Time: 2

Long Self Test Time: 131

Conveyance Self Test Time: 0

Attribute Log Revision: 16

Attribute Count: 19

Attributes:

ID#   ATTRIBUTE NAME                         FLAG       VALUE   WORST   THRESH  TYPE         UPDATED     FAILED    RAW VALUE

1     Raw Read Error Rate                    0x000B     100     100     062     Pre-fail     Always      Never     0

2     Throughput Performance                 0x0005     100     100     040     Pre-fail     Offline     Never     0

3     Spin Up Time                           0x0007     173     173     033     Pre-fail     Always      Never     2

4     Start/Stop Count                       0x0012     100     100     000     Old age      Always      Never     136

5     Reallocated Sector Count               0x0033     100     100     005     Pre-fail     Always      Never     0

7     Seek Error Rate                        0x000B     100     100     067     Pre-fail     Always      Never     0

8     Seek Time Performance                  0x0005     100     100     040     Pre-fail     Offline     Never     0

9     Power On Hours                         0x0012     100     100     000     Old age      Always      Never     75

10    Spin Retry Count                       0x0013     100     100     060     Pre-fail     Always      Never     0

12    Power Cycle Count                      0x0032     100     100     000     Old age      Always      Never     73

191   G-Sense Error Rate                     0x000A     100     100     000     Old age      Always      Never     0

192   Power Off Retract Count                0x0032     100     100     000     Old age      Always      Never     1

193   Load Cycle Count                       0x0012     099     099     000     Old age      Always      Never     13221

194   Temperature Celsius                    0x0002     229     229     000     Old age      Always      Never     24 (Lifetime Min/Max 15/39)

196   Reallocated Event Count                0x0032     100     100     000     Old age      Always      Never     0

197   Current Pending Sector Count           0x0022     100     100     000     Old age      Always      Never     0

198   Offline Uncorrectable Sector Count     0x0008     100     100     000     Old age      Offline     Never     0

199   UDMA CRC Error Count                   0x000A     200     200     000     Old age      Always      Never     143

223   Load Retry Count                       0x000A     100     100     000     Old age      Always      Never     0

Error Log Version: 1

Error Count: 75

Error Log:

Error 75 occured at disk power-on lifetime: 75 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:13:12.500  READ LOG EXT

60 00 30 88 40 67 40 00      00:13:12.500  READ FPDMA QUEUED

60 E8 28 F0 D5 66 40 00      00:13:12.500  READ FPDMA QUEUED

60 10 20 E0 D5 66 40 00      00:13:12.500  READ FPDMA QUEUED

60 08 18 D8 D5 66 40 00      00:13:12.500  READ FPDMA QUEUED

Error 74 occured at disk power-on lifetime: 74 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:01:32.500  READ LOG EXT

60 B8 F8 68 1B 93 40 00      00:01:32.500  READ FPDMA QUEUED

60 00 F0 68 13 93 40 00      00:01:32.500  READ FPDMA QUEUED

60 00 E8 68 0B 93 40 00      00:01:32.500  READ FPDMA QUEUED

60 00 E0 68 03 93 40 00      00:01:32.400  READ FPDMA QUEUED

Error 73 occured at disk power-on lifetime: 70 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:37:53.600  READ LOG EXT

60 50 B8 08 55 54 40 00      00:37:53.500  READ FPDMA QUEUED

60 A8 B0 58 4F 54 40 00      00:37:53.500  READ FPDMA QUEUED

60 00 A8 58 47 54 40 00      00:37:53.500  READ FPDMA QUEUED

60 78 A0 E0 41 54 40 00      00:37:53.500  READ FPDMA QUEUED

Error 72 occured at disk power-on lifetime: 69 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:52:46.300  READ LOG EXT

60 00 30 A8 79 BD 40 00      00:52:46.200  READ FPDMA QUEUED

60 00 28 A8 77 BD 40 00      00:52:46.200  READ FPDMA QUEUED

60 00 20 A8 76 BD 40 00      00:52:46.200  READ FPDMA QUEUED

60 80 18 28 76 BD 40 00      00:52:46.200  READ FPDMA QUEUED

Error 71 occured at disk power-on lifetime: 68 hours

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

00 51 01 10 00 00 00

Error: Unknown

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

-- -- -- -- -- -- -- --  ----------------  --------------------

2F 00 01 10 00 00 00 00      00:36:21.200  READ LOG EXT

60 40 F0 28 B6 B0 40 00      00:36:21.200  READ FPDMA QUEUED

60 40 E8 E8 B5 B0 40 00      00:36:21.200  READ FPDMA QUEUED

60 40 E0 A8 B5 B0 40 00      00:36:21.200  READ FPDMA QUEUED

60 40 D8 68 14 B0 40 00      00:36:21.200  READ FPDMA QUEUED

Self Test Log Revision: 1

Self Test Log Count: 2

Self Test Log:

Num  Test_Description    Status                   Remaining  LifeTime(hours)  LBA_of_first_error

# 1  Extended offline    Completed without error         0%        74         -
# 2  Short offline       Completed without error         0%        11         -

dispositivo:

MacBook Pro 15" Unibody 2.53 GHz Mid 2009

Status:

open