Pular para o conteúdo principal
Ajuda

Versão atual de: Michael ,

Texto:

What "Conductor"It looks like you are you referring to? Capacitor?? Just test the newto PP1V2_SDRAM?
[image|1181185]

PP_Buck4_LX is on
one side of the coil going to make sure itPMIC, the other side is PP1V2_SDRAM, If you change L1217 and the short goes away, and then you put back a good part. Butnew Coil and it comes back...have you tested PP1V2 with the coil off? If SDRAM is not shorted when you have time, post a picture of part or part number?pull it I believe the short would be under PMIC.

[image|1181189]
What "Conductor"It looks like you are you referring to? Capacitor?? Just test the newto PP1V2_SDRAM?
[image|1181185]

PP_Buck4_LX is on
one side of the coil going to make sure itPMIC, the other side is PP1V2_SDRAM, If you change L1217 and the short goes away, and then you put back a good part. Butnew Coil and it comes back...have you tested PP1V2 with the coil off? If SDRAM is not shorted when you have time, post a picture of part or part number?pull it I believe the short would be under PMIC.

[image|1181189]

Status:

open

Postagem original de: Michael ,

Texto:

What "Conductor" are you referring to? Capacitor?? Just test the new one to make sure it is a good part. But when you have time, post a picture of part or part number?

Status:

open