Pular para o conteúdo principal
Ajuda

Versão atual de: Ben ,

Texto:

I cannot stress this enough. '''Make

'''Make
sure the iPhone metal housing frame is bent back closest to original condition so that you are not squeezing your screens in causing the digitizer to go faulty.'''
I cannot stress this enough. '''Make

'''Make
sure the iPhone metal housing frame is bent back closest to original condition so that you are not squeezing your screens in causing the digitizer to go faulty.'''
 
You can test fit the corners of the housing with the screen by placing the screen flat upside down against the frame.
 
It has to be easy to install the screen without requiring forcing the screen in.
 
Make sure iPhone housing is not bent, dented in corners obstructing screen from going in and if you really need to, file / sand off the bottom plastic of the screen a bit to make it easier to fit in due to denting / bends.
 
Once you see the glass separating from the plastic screen housing frame due to forcing the screen in then I recommend trying another screen because that one may already have gone faulty from forcing the screen into the housing.

Status:

open

Editado por: Ben ,

Texto:

I cannot stress this enough. '''Make sure the iPhone metal housing frame is bent back closest to original condition'''condition so that you are not squeezing your screens in causing the digitizer to go faulty.faulty.'''
I cannot stress this enough. '''Make sure the iPhone metal housing frame is bent back closest to original condition'''condition so that you are not squeezing your screens in causing the digitizer to go faulty.faulty.'''
 
You can test fit the corners of the housing with the screen by placing the screen flat upside down against the frame.
 
It has to be easy to install the screen without requiring forcing the screen in.
 
Make sure iPhone housing is not bent, dented in corners obstructing screen from going in and if you really need to, file / sand off the bottom plastic of the screen a bit to make it easier to fit in due to denting / bends.
 
Once you see the glass separating from the plastic screen housing frame due to forcing the screen in then I recommend trying another screen because that one may already have gone faulty from forcing the screen into the housing.

Status:

open

Editado por: Ben ,

Texto:

I cannot stress this enough. Make'''Make sure the iPhone metal housing frame is bent back closest to original conditioncondition''' so that you are not squeezing your screens in causing the digitizer to go faulty.
I cannot stress this enough. Make'''Make sure the iPhone metal housing frame is bent back closest to original conditioncondition''' so that you are not squeezing your screens in causing the digitizer to go faulty.
 
You can test fit the corners of the housing with the screen by placing the screen flat upside down against the frame.
 
It has to be easy to install the screen without requiring forcing the screen in.
 
Make sure iPhone housing is not bent, dented in corners obstructing screen from going in and if you really need to, file / sand off the bottom plastic of the screen a bit to make it easier to fit in due to denting / bends.
 
Once you see the glass separating from the plastic screen housing frame due to forcing the screen in then I recommend trying another screen because that one may already have gone faulty from forcing the screen into the housing.

Status:

open

Editado por: Ben ,

Texto:

I cannot stress this enough. Make sure the iPhone metal housing frame is bent back closest to original condition so that you are not squeezing your screens in causing the digitizer to go faulty.
 
You can test fit the corners of the housing with the screen by placing the screen flat upside down against the frame.
 
It has to be easy to install the screen without requiring forcing the screen in.
 
Make sure iPhone housing is not bent, dented in corners obstructing screen from going in and if you really need to, file / sand off the bottom plastic of the screen a bit to make it easier to fit in due to denting / bends.
 
Once you see the glass separating from the plastic screen housing frame due to forcing the screen in then I recommend trying another screen because that one may already have gone faulty from forcing the screen into the housing.

Status:

open

Postagem original de: Ben ,

Texto:

I cannot stress this enough. Make sure the iPhone metal housing frame is bent back closest to original condition so that you are not squeezing your screens in causing the digitizer to go faulty.

You can test fit the corners of the housing with the screen by placing the screen flat upside down against the frame.

It has to be easy to install the screen without requiring forcing the screen in.

Make sure iPhone housing is not bent, dented in corners obstructing screen from going in and if you really need to, file / sand off the bottom plastic of the screen a bit to make it easier to fit in due to denting / bends.

Status:

open