Ir para o conteúdo principal
Ajuda

Versão atual de: Mike ali ,

Título:

-After replaced pro 4 LCD,won't turn on on battery mode unless plug it
+After replacing sr pro 4 LCD,won't turn on battery mode unless plug it

Texto:

-After i replaced a surface pro 4 LCD , won't turn on on battery mode unless plug it.
+After replacing the surface pro 4 LCD, it won't turn on the battery mode unless i plug it with the charger
-Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.
-it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen ?
-and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on
+After i had replaced a surface pro 4 LCD, won't turn on battery mode unless plug it.[br]
-but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .
+
+Before taking off the broken screen the pro was working good just the screen was broken, so i turned it off then started working on it. after taking off the old broken screen. i tried to connect the new LCD on to test it but no response at all.
+
+
+
+it does only work when i plug it in the charger and it does show me that the battery is 100% full on the screen?
+
+also i did put a piece of paper between the connects part for the battery and the motherboard. it does show me an X on the battery icon on the screen when i turn it on
+
+but i couldn't resolve the problem for 1 week now and i have been searching online but no one has had these issues before.
so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open

Resposta Aceita:

456788

Editado por: Mike ali ,

Título:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Texto:

-After i replaced pro 4 LCD , won't turn on on battery mode unless plug it.
+After i replaced a surface pro 4 LCD , won't turn on on battery mode unless plug it.
Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.
it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen ?
and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on
but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .
so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open

Resposta Aceita:

456788

Editado por: Mike ali ,

Título:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Texto:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open

Resposta Aceita:

+456788

Editado por: Mike ali ,

Título:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Texto:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open

Resposta Aceita:

-487352

Editado por: Mike ali ,

Título:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Texto:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open

Resposta Aceita:

+487352

Editado por: Mike ali ,

Título:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Texto:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open

Resposta Aceita:

-456788

Editado por: Mike ali ,

Título:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Texto:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open

Resposta Aceita:

+456788

Editado por: Ben ,

Título:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Texto:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open

Resposta Aceita:

-449537

Editado por: oldturkey03 (detalhes da votação) ,

Título:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Texto:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open

Resposta Aceita:

+449537

Mensagem original de: Mike ali ,

Título:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Texto:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

dispositivo:

Microsoft Surface Pro 4

Status:

open