Conserte seus objetos Comunidade Loja
Ajuda

Versão atual de: Alisha C

Texto:

To reset your headphones
# Hold down these two buttons for 10 seconds:
# Power button
# Volume down (–) button
# When the LED indicator light flashes, release the buttons. Your earphones are now reset and ready to be set up with your devices again.
+Let me know if this helps.
-Let me know if this helps.
+[quote]
+***iFixit Staff Edit:*** for more details on how to diagnose Beats headphones that won't turn on, check out the [link|https://www.ifixit.com/Wiki/Beats_Headphones_Will_Not_Turn_On|Beats Headphones Will Not Turn On|new_window=true] troubleshooting page.
+
+[/quote]

Status:

open

Editado por: Conor Bailey

Texto:

To reset your headphones
# Hold down these two buttons for 10 seconds:
# Power button
# Volume down (–) button
# When the LED indicator light flashes, release the buttons. Your earphones are now reset and ready to be set up with your devices again.
+
+Let me know if this helps.

Status:

open

Editado por: Conor Bailey

Texto:

-I found a support article but I don't think it's for your model, but you could try it anyway.
+To reset your headphones
-# Press and hold the power button for 10 seconds.
-# Release the button.
-# The Fuel Gauge LEDs will all blink white, followed by one blinking red.
-# When the lights stop flashing, reset is complete.
-# Your Studios will automatically power on after a successful reset.
+# Hold down these two buttons for 10 seconds:
+# Power button
+# Volume down (–) button
+# When the LED indicator light flashes, release the buttons. Your earphones are now reset and ready to be set up with your devices again.

Status:

open

Postagem original de: Conor Bailey

Texto:

I found a support article but I don't think it's for your model, but you could try it anyway.

# Press and hold the power button for 10 seconds.
# Release the button.
# The Fuel Gauge LEDs will all blink white, followed by one blinking red.
# When the lights stop flashing, reset is complete.
# Your Studios will automatically power on after a successful reset.

Status:

open