Ir para o conteúdo principal
Ajuda

Mensagem original de: L Pfaff ,

Texto:

@jerryt , Jerry Taylor, Do you here ant clicking at all to say switch is trying. Recheck all fuses to ensure they are all OK. If the switches work on other doors for windows, chances are the driver side main switch panel is defective or power wire/plug damaged/corroded you can test the switch with a 12 volt test light or a DVOM, quite often over time the wires in the harness between the door jamb and door frame get damaged(peel back wires protection to check/test) or there is a slight chance that pwr. windows  motor have failed on both doors(uncommon but could happen). See below trouble shooting links for diagnosing/testing for power window issues and removal of interior door panel. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

https://www.youtube.com/watch?v=2tLmH05UKwk

https://www.youtube.com/watch?v=aT3GjpqmoGc

http://www.clarks-garage.com/shop-manual/elect-20.htm

https://www.youtube.com/watch?v=pJIM3ss-jos

Status:

open