@gouda just like any other water exposed device you want to follow some simple rules. To start with stop trying to turn it on or to charge it. Remove the battery. then disassemble your device completely. Clean every part with a high grade (90%+) isopropyl alcohol. Do not forget to remove the EMI shields on the motherboard. Clean all the connectors as well. Yes, it is okay to submerge the board in alcohol. When they are properly cleaned, let them airdry for a brief time. Then repalce the battery with a new one. These batteries will fail so you will have to replace them for proper troubl shooting. Once you have done all that, reassemble your device and now you can charge it or try to turn it on. Let us know what you get,
+
@gouda just like any other water exposed device you want to follow some simple rules. To start with stop trying to turn it on or to charge it. Remove the battery. then disassemble your device completely. Clean every part with a high grade (90%+) isopropyl alcohol. Do not forget to remove the EMI shields on the motherboard. Clean all the connectors as well. Yes, it is okay to submerge the board in alcohol. When they are properly cleaned, let them airdry for a brief time. Then replace the battery with a new one. These batteries will fail so you will have to replace them for proper trouble shooting. Once you have done all that, reassemble your device and now you can charge it or try to turn it on. Let us know what you get,
@gouda just like any other water exposed device you want to follow some simple rules. To start with stop trying to turn it on or to charge it. Remove the battery. then disassemble your device completely. Clean every part with a high grade (90%+) isopropyl alcohol. Do not forget to remove the EMI shields on the motherboard. Clean all the connectors as well. yes it is okay to submerge the board in alcohol. When they are properly cleaned, let them airdry for a brief time. Then repalce the battery with a new one. These batteries will fail so you will have to replace them for proper troubl shooting. Once you have done all that, reassemble your device and now you can charge it or try to turn it on. Let us know what you get,
+
@gouda just like any other water exposed device you want to follow some simple rules. To start with stop trying to turn it on or to charge it. Remove the battery. then disassemble your device completely. Clean every part with a high grade (90%+) isopropyl alcohol. Do not forget to remove the EMI shields on the motherboard. Clean all the connectors as well. Yes, it is okay to submerge the board in alcohol. When they are properly cleaned, let them airdry for a brief time. Then repalce the battery with a new one. These batteries will fail so you will have to replace them for proper troubl shooting. Once you have done all that, reassemble your device and now you can charge it or try to turn it on. Let us know what you get,
@gouda just like any other water exposed device you want to follow some simple rules. To start with stop trying to turn it on or to charge it. Remove the battery. then disassemble your device completely. Clean every part with a high grade (90%+) isopropyl alcohol. Do not forget to remove the EMI shields on the motherboard. Clean all the connectors as well. yes it is okay to submerge the board in alcohol. When they are properly cleaned, let them airdry for a brief time. Then repalce the battery with a new one. These batteries will fail so you will have to replace them for proper troubl shooting. Once you have done all that, reassemble your device and now you can charge it or try to turn it on. Let us know what you get,