Pular para o conteúdo principal
Ajuda

Versão atual de: Dave ,

Título:

Safe disposal of LiPo pouch batteries

Texto:

As with many here on iFixit.com, have had the occasion to remove a failed battery and replace it with a new one. I am well aware the LiPo batteries can become violent if mishandled, they don't seem to like being bent, punctured, over charged or over drawn. The question is what procedure should be applied to ensure you are safely storing, transporting and disposing of them?

I know there are recycling options in some places, but the battery may still pose a fire or explosion hazard while being stored and/or transported for disposal.

A short time ago 9V batteries came under scrutiny for starting [https://www.youtube.com/watch?v=75_f6CjIcz8|fires] after being thrown in the garbage. It is now highly recommended that all 9Vs be taped up to prevent the contacts from shorting against other conductors when disposed of.

So what should we do with the LiPos?

Is there a voltage threshold below which we shouldn't worry?

Would fully discharging the cell (past the limit board) render them safe from puncture arcing?

What about packs that have already started to go critical (bloated packs)? how long do you isolate them before the blast danger is significantly reduced?

dispositivo:

All LiPo battery pouch fed devices

Status:

open

Resposta Aceita:

349571

Postagem original de: Dave ,

Título:

Safe disposal of LiPo pouch batteries

Texto:

As with many here on iFixit.com, have had the occasion to remove a failed battery and replace it with a new one. I am well aware the LiPo batteries can become violent if mishandled, they don't seem to like being bent, punctured, over charged or over drawn. The question is what procedure should be applied to ensure you are safely storing, transporting and disposing of them?

I know there are recycling options in some places, but the battery may still pose a fire or explosion hazard while being stored and/or transported for disposal.

A short time ago 9V batteries came under scrutiny for starting [https://www.youtube.com/watch?v=75_f6CjIcz8|fires] after being thrown in the garbage. It is now highly recommended that all 9Vs be taped up to prevent the contacts from shorting against other conductors when disposed of.

So what should we do with the LiPos?

Is there a voltage threshold below which we shouldn't worry?

Would fully discharging the cell (past the limit board) render them safe from puncture arcing?

What about packs that have already started to go critical (bloated packs)? how long do you isolate them before the blast danger is significantly reduced?

dispositivo:

All LiPo battery pouch fed devices

Status:

open