Pular para o conteúdo principal
Ajuda

Versão atual de: oldturkey03 (detalhes da votação) ,

Título:

I have no backlight after multiple repairs 13" Macbook

Texto:

Mid 2007 machine: I broke my LCD display and found a replacement off ebay. It came with the wiring harness, inverter and all the metal brackets for $100. I was nervous because this seemed to good to be true for $100. I changed it out step for step from the repair section and got nothing. So I ordered another LCD, and inverter from here. Did everything step by step again with no luck. I tried one more inverter and now I can see the display if I put it at an angle but there is no light at all. I have no idea were to go from here. Everything else works fine on it because I am using it on an external monitor, but that defeats the purpose of having a laptop. Any ideas would be greatly appreciated!

This is the model info off the backside of the kepad:
A1181  (Mid 2007)
Black/2.16/2x1G/200/SD/AP/BT

dispositivo:

MacBook Core 2 Duo

Status:

open

Resposta Aceita:

3448

Editado por: Murphy312 ,

Título:

I have no backlight after multiple repairs 13" Macbook
I have no backlight after multiple repairs 13" Macbook

Texto:

Mid 2007 machine: I broke my LCD display and found a replacement off ebay. It came with the wiring harness, inverter and all the metal brackets for $100. I was nervous because this seemed to good to be true for $100. I changed it out step for step from the repair section and got nothing. So I ordered another LCD, and inverter from here. Did everything step by step again with no luck. I tried one more inverter and now I can see the display if I put it at an angle but there is no light at all. I have no idea were to go from here. Everything else works fine on it because I am using it on an external monitor, but that defeats the purpose of having a laptop. Any ideas would be greatly appreciated!

This is the model info off the backside of the kepad:
A1181  (Mid 2007)
Black/2.16/2x1G/200/SD/AP/BT

dispositivo:

MacBook Core 2 Duo

Status:

open

Editado por: Ben Eisenman ,

Título:

I have no backlight after multiple repairs

Texto:

IMid 2007 machine: I broke my LCD display and found a replacement off ebay. It came with the wiring harness, inverter and all the metal brackets for $100. I was nervous because this seemed to good to be true for $100. I changed it out step for step from the repair section and got nothing. So I ordered another LCD, and inverter from here. Did everything step by step again with no luck. I tried one more inverter and now I can see the display if I put it at an angle but there is no light at all. I have no idea were to go from here. Everything else works fine on it because I am using it on an external monitor, but that defeats the purpose of having a laptop. Any ideas would be greatly appreciated!
IMid 2007 machine: I broke my LCD display and found a replacement off ebay. It came with the wiring harness, inverter and all the metal brackets for $100. I was nervous because this seemed to good to be true for $100. I changed it out step for step from the repair section and got nothing. So I ordered another LCD, and inverter from here. Did everything step by step again with no luck. I tried one more inverter and now I can see the display if I put it at an angle but there is no light at all. I have no idea were to go from here. Everything else works fine on it because I am using it on an external monitor, but that defeats the purpose of having a laptop. Any ideas would be greatly appreciated!
 
This is the model info off the backside of the kepad:
A1181 (Mid 2007)
Black/2.16/2x1G/200/SD/AP/BT

dispositivo:

MacBook Core 2 Duo Mid 2007
MacBook Core 2 Duo Mid 2007

Status:

open

Postagem original de: Murphy312 ,

Título:

I have no backlight after multiple repairs

Texto:

I broke my LCD display and found a replacement off ebay. It came with the wiring harness, inverter and all the metal brackets for $100. I was nervous because this seemed to good to be true for $100. I changed it out step for step from the repair section and got nothing. So I ordered another LCD, and inverter from here. Did everything step by step again with no luck. I tried one more inverter and now I can see the display if I put it at an angle but there is no light at all. I have no idea were to go from here. Everything else works fine on it because I am using it on an external monitor, but that defeats the purpose of having a laptop. Any ideas would be greatly appreciated!

This is the model info off the backside of the kepad:
A1181  (Mid 2007)
Black/2.16/2x1G/200/SD/AP/BT

dispositivo:

MacBook Core 2 Duo Mid 2007

Status:

open