Ir para o conteúdo principal
Ajuda

Versão atual de: yotaruvegeta ,

Título:

How to realign blu-ray dirve

Texto:

I had a YLOD problem. Before I eventually fixed it, I made the mistake of going into the blu ray drive and pulling out the disc that was stuck inside.

I think that this screwed with the ability of the drive to draw in discs like it normally does. What steps should I follow to properly reset this and get it to take in discs?

I have done the method where you unscrew one of the gears and that snaps everything back into place, but that doesn't seem to be all that I need to do. What position do the "arms" need to be in, for instance?

dispositivo:

PlayStation 3

Status:

open

Resposta Aceita:

+28479

Editado por: yotaruvegeta ,

Título:

How to realign blu-ray dirve

Texto:

I had a YLOD problem. Before I eventually fixed it, I made the mistake of going into the blu ray drive and pulling out the disc that was stuck inside.
I think that this screwed with the ability of the drive to draw in discs like it normally does. What steps should I follow to properly reset this and get it to take in discs?
-I have done the method where you unscrew one of the gears and that snaps eveything back into place, but that doesn't seem to be all that I need to do. What position do the "arms" need to be in, for instance?
+I have done the method where you unscrew one of the gears and that snaps everything back into place, but that doesn't seem to be all that I need to do. What position do the "arms" need to be in, for instance?

dispositivo:

PlayStation 3

Status:

open

Mensagem original de: yotaruvegeta ,

Título:

How to realign blu-ray dirve

Texto:

I had a YLOD problem. Before I eventually fixed it, I made the mistake of going into the blu ray drive and pulling out the disc that was stuck inside.

I think that this screwed with the ability of the drive to draw in discs like it normally does. What steps should I follow to properly reset this and get it to take in discs?

I have done the method where you unscrew one of the gears and that snaps eveything back into place, but that doesn't seem to be all that I need to do. What position do the "arms" need to be in, for instance?

dispositivo:

PlayStation 3

Status:

open