Pular para o conteúdo principal
Ajuda

Versão atual de: bogart ,

Título:

My washer stops at the rinse cycle

Texto:

Washer fills, agitates no problem. then the washer will not spin rinse
 
or anything else the washer is done. this is the same on all 3 different cycles.
 
There is no hum like it wants to go or any sound at all.
 
Timer? Motor?
Timer? Motor?
 
=== Update (10/13/2015) ===
 
model 110.20922990. I don't believe it is a clogged drain. Because after you get the
model 110.20922990. I don't believe it is a clogged drain. Because after you get the
timer past the wash cycle on any of the different wash cycles, there is nothing.
 
Not a buzz not a hum nothing. You can move the dial any place after the end of
 
the wash cycle and try to start the washer with no luck. You can go to the spin
 
cycle and try to start the machine no go. You can go back to the wash cycle nand
 
start it up no problem.

dispositivo:

Kenmore 90 Series Washing Machine

Status:

open

Resposta Aceita:

263012

Editado por: bogart ,

Título:

My washer stops at the rinse cycle

Texto:

Washer fills, agitates no problem. then the washer will not spin rinse
 
or anything else the washer is done. this is the same on all 3 different cycles.
 
There is no hum like it wants to go or any sound at all.
 
Timer? Motor?

=== Update (10/13/2015) ===

model 110.20922990. I don't believe it is a clogged drain. Because after you get the
timer past the wash cycle on any of the different wash cycles, there is nothing.
Not a buzz not a hum nothing. You can move the dial any place after the end of
the wash cycle and try to start the washer with no luck. You can go to the spin
cycle and try to start the machine no go. You can go back to the wash cycle nand
start it up no problem.
Timer? Motor?

=== Update (10/13/2015) ===

model 110.20922990. I don't believe it is a clogged drain. Because after you get the
timer past the wash cycle on any of the different wash cycles, there is nothing.
Not a buzz not a hum nothing. You can move the dial any place after the end of
the wash cycle and try to start the washer with no luck. You can go to the spin
cycle and try to start the machine no go. You can go back to the wash cycle nand
start it up no problem.

dispositivo:

Kenmore 90 Series Washing Machine

Status:

open

Postagem original de: bogart ,

Título:

My washer stops at the rinse cycle

Texto:

Washer fills, agitates no problem.  then the washer will not spin rinse

or anything else the washer is done.  this is the same on all 3 different cycles.

There is no hum like it wants to go or any sound at all.

Timer?  Motor?

dispositivo:

Kenmore 90 Series Washing Machine

Status:

open