Pular para o conteúdo principal
Ajuda

Versão atual de: Majesty ,

Texto:

The fact that the external display works is great news, it eliminates the possiblity of board or GPU issues. Can you see faint images of the desktop with a flashlight? If so then your problem lies in the Inverter Board or Inverter cables, but it should still show up under in About About This Mac. If you're getting no picture or faint images at all, then your problem lies in the DATA cable or Display, which explains why your display is not showing under your system profiler. Steps 28-30 of this [guide|1342|GUIDE] illustrate the Inverter Board and it's connections, it's the part covered in an orange colored plastic. Step number 8 shows the DATA cable. Make sure all of these cables are properly seated, and I would replace the Inverter Board, Inverter cable, and DATA cable now that your inside the machine. If this does not remedy the situation then you may have a bad display, it may need to be replaced. But, I would look into these cables first.
The fact that the external display works is great news, it eliminates the possiblity of board or GPU issues. Can you see faint images of the desktop with a flashlight? If so then your problem lies in the Inverter Board or Inverter cables, but it should still show up under in About About This Mac. If you're getting no picture or faint images at all, then your problem lies in the DATA cable or Display, which explains why your display is not showing under your system profiler. Steps 28-30 of this [guide|1342|GUIDE] illustrate the Inverter Board and it's connections, it's the part covered in an orange colored plastic. Step number 8 shows the DATA cable. Make sure all of these cables are properly seated, and I would replace the Inverter Board, Inverter cable, and DATA cable now that your inside the machine. If this does not remedy the situation then you may have a bad display, it may need to be replaced. But, I would look into these cables first.

Status:

open

Editado por: Majesty ,

Texto:

The fact that the external display works is great news, it eliminates the possiblity of board or GPU issues. Can you see faint images of the desktop with a flashlight? If so then your problem lies in the Inverter Board or Inverter cablescables, but it should still show up under in About This Mac. If you're getting no picture or faint images at all, then your problem lies in the DATA cable or DisplayDisplay, which explains why your display is not showing under your system profiler. Steps 28-30 of this [guide|1342|GUIDE] illustrate the Inverter Board and it's connections, it's the part covered in an orange colored plastic. Step number 8 shows the DATA cable. Make sure all of these cables are properly seated, and I would replace the Inverter Board, Inverter cable, and DATA cable now that your inside the machine. If this does not remedy the situation then you may have a bad display, it may need to be replaced. But, I would look into these cables first.
The fact that the external display works is great news, it eliminates the possiblity of board or GPU issues. Can you see faint images of the desktop with a flashlight? If so then your problem lies in the Inverter Board or Inverter cablescables, but it should still show up under in About This Mac. If you're getting no picture or faint images at all, then your problem lies in the DATA cable or DisplayDisplay, which explains why your display is not showing under your system profiler. Steps 28-30 of this [guide|1342|GUIDE] illustrate the Inverter Board and it's connections, it's the part covered in an orange colored plastic. Step number 8 shows the DATA cable. Make sure all of these cables are properly seated, and I would replace the Inverter Board, Inverter cable, and DATA cable now that your inside the machine. If this does not remedy the situation then you may have a bad display, it may need to be replaced. But, I would look into these cables first.

Status:

open

Editado por: Majesty ,

Texto:

The fact that the external display works is great news, it eliminates the possiblity of board or GPU issues. Can you see faint images of the desktop with a flashlight? If so then your problem lies in the Inverter Board or Inverter cables. If you're getting no picture or faint images at all, then your problem lies in the DATA cable or Display. Steps 28-30 of this [guide|1342|GUIDE] illustrate the Inverter Board and it's connectionsconnections, it's the part covered in an orange colored plastic. Step number 8 shows the DATA cable. Make sure all of these cables are properly seated, and I would replace the Inverter Board, Inverter cable, and DATA cable now that your inside the machine. If this does not remedy the situation then you may have a bad display, it may need to be replaced. But, I would look into these cables first.
The fact that the external display works is great news, it eliminates the possiblity of board or GPU issues. Can you see faint images of the desktop with a flashlight? If so then your problem lies in the Inverter Board or Inverter cables. If you're getting no picture or faint images at all, then your problem lies in the DATA cable or Display. Steps 28-30 of this [guide|1342|GUIDE] illustrate the Inverter Board and it's connectionsconnections, it's the part covered in an orange colored plastic. Step number 8 shows the DATA cable. Make sure all of these cables are properly seated, and I would replace the Inverter Board, Inverter cable, and DATA cable now that your inside the machine. If this does not remedy the situation then you may have a bad display, it may need to be replaced. But, I would look into these cables first.

Status:

open

Editado por: Majesty ,

Texto:

The fact that the external display works is great news, it eliminates the possiblity of board or GPU issues. Can you see faint images of the desktop with a flashlight? If so then your problem lies in the Inverter Board or Inverter cables. If you're getting no picture or faint images at all, then your problem lies in the DATA cable or Display. Steps 28-30 of this [guide|1342|GUIDE] illustrate the Inverter Board and it's connections. Step number 8 shows the DATA cable. Make sure all of these cables are properly seated, and I would replace the Inverter Board, Inverter cable, and DATA cable now that your inside the machine. If this does not remedy the situation then you may have a bad display, it may need to be replaced. But, I would look into these cables first.
The fact that the external display works is great news, it eliminates the possiblity of board or GPU issues. Can you see faint images of the desktop with a flashlight? If so then your problem lies in the Inverter Board or Inverter cables. If you're getting no picture or faint images at all, then your problem lies in the DATA cable or Display. Steps 28-30 of this [guide|1342|GUIDE] illustrate the Inverter Board and it's connections. Step number 8 shows the DATA cable. Make sure all of these cables are properly seated, and I would replace the Inverter Board, Inverter cable, and DATA cable now that your inside the machine. If this does not remedy the situation then you may have a bad display, it may need to be replaced. But, I would look into these cables first.

Status:

open

Postagem original de: Majesty ,

Texto:

The fact that the external display works is great news, it eliminates the possiblity of board or GPU issues. Can you see faint images of the desktop with a flashlight?  If so then your problem lies in the Inverter Board or Inverter cables. If you're getting no picture or faint images at all, then your problem lies in the DATA cable or Display.   Steps 28-30 of this [guide|1342|GUIDE] illustrate the Inverter Board and it's connections.  Step number 8 shows the DATA cable.

Status:

open