Ir para o conteúdo principal
Ajuda

Versão atual de: John

Texto:

-Swap the bushings off the trucks from another board if they are the same size and see what happens. Also you might need to get those pads that fit under the trucks against the board but really I think it's the bushings in the middle of the trucks, also tighten the four screws on the truck plate against the board really tight might wanna get those new screw nuts make sure it's all tight. Then bust a heel flip 360 down about 7 stairs to see if its ok .
+Swap the bushings off the trucks from another board if they are the same size and see what happens. Also you might need to get those pads that fit under the trucks against the board but really I think it's the bushings in the middle of the trucks, also tighten the four screws on the truck plate against the board really tight might wanna get new a whole nuts and bolts setup to make sure it's all tight. Then bust a heel flip 360 down about 7 stairs to see if its ok.

Status:

open

Editado por: John

Texto:

-Swap the bushings off the trucks from another board if they are the same size and see what happens. Also you might need to get those pads that fit under the trucks against the board but really I think it's the bushings in the middle of the trucks, also tighten the four screws on the truck plate against the board really tight might wanna get those new screw nuts make shure it's all tight. Then bust a heel flip 360 down about 7 stairs to see if its ok .
+Swap the bushings off the trucks from another board if they are the same size and see what happens. Also you might need to get those pads that fit under the trucks against the board but really I think it's the bushings in the middle of the trucks, also tighten the four screws on the truck plate against the board really tight might wanna get those new screw nuts make sure it's all tight. Then bust a heel flip 360 down about 7 stairs to see if its ok .

Status:

open

Editado por: John

Texto:

-Swap the bushings off the trucks from another board if they are the same size and see what happens. Also you might need to get those pads that fit under the trucks against the board but really I think it's the bushings in the middle of the trucks. Then bust a heel flip 360 down about 7 stairs to see if its ok .
+Swap the bushings off the trucks from another board if they are the same size and see what happens. Also you might need to get those pads that fit under the trucks against the board but really I think it's the bushings in the middle of the trucks, also tighten the four screws on the truck plate against the board really tight might wanna get those new screw nuts make shure it's all tight. Then bust a heel flip 360 down about 7 stairs to see if its ok .

Status:

open

Editado por: John

Texto:

-Swap the bushings off the trucks from another board if they are the same size and see what happens. Also you might need to get those pads that fit under the trucks against the board but really I think it's the bushings in the middle of the trucks. Then bust a heel flip 360 down about 7 stairs to see if its ok . And remember don't try to bust the trick if you can't land it .
+Swap the bushings off the trucks from another board if they are the same size and see what happens. Also you might need to get those pads that fit under the trucks against the board but really I think it's the bushings in the middle of the trucks. Then bust a heel flip 360 down about 7 stairs to see if its ok .

Status:

open

Editado por: John

Texto:

-Swap the bushings off the trucks form another board if they are the same size and see what happens.
+Swap the bushings off the trucks from another board if they are the same size and see what happens. Also you might need to get those pads that fit under the trucks against the board but really I think it's the bushings in the middle of the trucks. Then bust a heel flip 360 down about 7 stairs to see if its ok . And remember don't try to bust the trick if you can't land it .

Status:

open

Editado por: John

Texto:

-Swap the bushings off another board if they are the same size and see what happens.
+Swap the bushings off the trucks form another board if they are the same size and see what happens.

Status:

open

Postagem original de: John

Texto:

Swap the bushings off another board if they are the same size and see what happens.

Status:

open